Novatek 2 Ft Long Reach Scaler – 28XC2ST

Novatek 28XC2ST 2 Ft Long Reach Scaler — Reach the Surface, Skip the Bending

The 28XC2ST is a 2-foot air-powered chisel and scraper scaler built for crews that descale, strip coatings, and pull sheet goods without crouching or working overhead by hand. The steel barrel and two-foot reach put the working tip on the deck, the wall, or the low ceiling while the operator stays upright. One tool covers two jobs: swap between chisel tips and scraper blades in seconds on the same unit.

Why Crews Run the 28XC2ST

At 2 feet, this is the shorter steel Long Reach — closer-in work where a 5-foot barrel is more than the job needs. The steel construction trades weight for durability against repeated impact on rust, scale, and bonded coatings.

• Work floors, low walls, and tank interiors standing up to cut bending and back strain
• Drives chisel tips at 2,200 blows per minute for rust, scale, and bonded coatings
• Swap between 1″, 2″, and 4″ chisels and 4″, 8″, and 12″ scraper blades on one body
• Pull vinyl flooring, ceramic tile, thin-set, and mastic with the scraper attachment
• Runs on 5 SCFM from a portable compressor — no electric or hydraulic power needed
• Steel ball retainer and steel components hold up to repeated impact loading

28XC2ST Applications and Environments

Marine deck descaling, warehouse and factory floor coating removal, low overhead structural steel maintenance, vinyl and ceramic tile stripping, and tank cleaning. The 2-foot reach suits closer work where a 5-foot barrel adds more length than the task requires.

Specifications

Documents

Manual