Novatek 28PG Super Scraper Scaler – 28CS130

28PG Super Scraper Scaler with 5/8-Inch Hex Holder

The 28CS130 is a pistol-grip chisel scaler built around a 5/8-inch hex-shank holder, driving a 1-inch wide chisel at 2,200 blows per minute. The heavier hex shank carries the wide super-scraper attachments that strip large flat areas in fewer passes. At 6.1 pounds and 14.5 inches, the angled grip steadies the impact on production descaling.

28CS130 Hex Holder and Super Scrapers

The tool ships with a 5/8-inch hex-shank chisel holder and a 1-inch wide chisel as standard, accepts 2-inch, 3-inch, and 4-inch chisels, and takes 4-inch, 8-inch, and 12-inch super scrapers for clearing broad flat surfaces.

• Clears large flat areas faster with 4-, 8-, and 12-inch super scrapers
• Carries wide attachments on a heavy 5/8-inch hex shank
• Breaks out thick coatings and slag at 2,200 blows per minute
• Steadies the impact with an angled pistol grip
• Runs on a portable compressor at 7.5 cfm via a 1/4-inch NPT inlet

28CS130 Applications and Environments

Shipyard and marine crews use the 28CS130 with super scrapers to strip deck coatings and broad hull areas. Bridge and structural-steel contractors clear large plate surfaces, while abatement and restoration teams remove mastic, failed coatings, and floor buildup across wide areas.

Specifications

Documents

Manual