Novatek HDSH1 – Long Sc. Hammer Shroud – PHS1VSEHDL

Novatek Shrouded HD Single Scaling Hammer VSE (Long Handle) for Dust-Controlled Coating Removal

The PHS1VSEHDL pairs the single-piston scaling hammer with a vacuum shroud that captures debris and dust at the impact point. It drives one tungsten carbide cruciform piston at 2,500 blows per minute, the same impact as the open HD-SH1, while a shroud and vacuum port route material to a connected dust collector. The 18-inch handle suits deck, slab, and floor-level work where the operator wants reach and dust containment together.

VSE Single Long Handle: Dust Capture at the Single-Piston Head

The shroud surrounds the cruciform head and connects through a port to a vacuum or dust collector, so coating debris and abrasive dust are pulled away as the piston works. This matters on lead paint, silica-bearing concrete, and enclosed marine or tank jobs where airborne material has to be controlled. Compared with the open HD-SH1, the VSE adds the shroud and port; compared with the 9-inch short version, the long handle adds reach and a more upright stance. The screw-top cap and nylon brush seal carry over for field service.

• Vacuum shroud and port capture debris and dust at the head for connection to a dust collector
• One tungsten carbide cruciform piston at 2,500 BPM, matching the open HD-SH1 impact
• 18-inch handle adds reach for deck, slab, and floor-level surfaces with dust containment in place
• Single-piston head stays narrow for edges, seams, and detail work
• Runs on 6.5 CFM from one mid-size compressor
• Screw-top cap allows field replacement of the head and piston
• Nylon brush seal cleans the piston each stroke to reduce grit wear

VSE Single Long Handle Applications and Environments

Structural steel: dust-controlled removal of pack rust, laminar rust, and high-build coatings on beams and plate. Marine: strips deck coatings and non-skid in enclosed spaces where airborne debris must be captured. Concrete: take-down and texturing of slab surfaces with silica dust routed to a collector; aggregate exposure with the optional bush hammer head.

Specifications

Documents

Manual