19PG Shrouded Scaler Kit for Transportable Dust-Free Prep
The Novatek 19PG Shrouded Scaler Kit takes the pistol-grip 19-needle vacuum-shroud package and packs it into a transportable set with a carrying case and accessories. The tool runs at 3000 blows per minute and strips coatings, rust, and weld slag while the vacuum shroud enclosure (VSE) holds debris at the surface for a HEPA vacuum. The rubber pistol grip keeps the operator’s hand behind the tool for control on vertical and overhead work.
What the 19PG Kit Adds at 3000 BPM
The Kit carries the same 3000-BPM tool and shroud as the package, plus a case and accessories so a crew can move between sites without losing parts. Each of the 19 needles has a 3mm chisel tip on a 7-inch shank and follows rivet heads, edges, and irregular profiles. The fully adjustable front vacuum take-off seals the shroud, the standard 1.5-inch take-off connects to a HEPA vacuum, and interchangeable nose pieces cover flat surfaces, corners, and angles. Low air consumption keeps it running on small, portable compressors.
- Case and accessories keep tool, shroud, and needles together between sites
- 3000 BPM for fast coating and corrosion removal on detail work
- Vacuum shroud captures debris at the surface for lead and asbestos compliance
- 1.5-inch take-off connects to a HEPA vacuum
- Pistol grip controls the tool overhead and on walls
- Interchangeable nose pieces seal to flat, corner, and angled surfaces
- Low air consumption runs on small, portable compressors
19PG Applications and Environments
The 19PG kit fits abatement contractors moving between lead-paint and asbestos jobs who need their dust-capture setup packed and ready. Shipyard crews use it for hull and weld-seam prep, bridge and structural-steel teams use it for spot rust and coating removal, and dust-controlled job sites use it where particulate must stay low. The case makes it the choice for crews that travel rather than stay on one fixed job.
Specifications
| Model | 19PG Shrouded (VSE) Needle Scaler |
| Configuration | Pistol grip |
| Needles | 19 pcs, 3mm chisel tip |
| Needle length | 7 in |
| Blows per minute | 3000 |
| Vacuum take-off | 1.5 in, fully adjustable front take-off |
| Nose pieces | Interchangeable for flat surfaces, corners, and angles |
| Optional needles | 2mm flat, 3mm flat or chisel tip |
| Includes | Tool, vacuum shroud, carrying case, and accessories (kit) |
Documents
Manual
