Sandia Sniper 80-3200-H Extractor – 200 PSI, 2000W Heater, Dual 3-Stage

Sandia Sniper 80-3200-H: 200 PSI Pump, 2000W Heater, Dual 3-Stage Motors

The Sandia Sniper 80-3200-H combines the dual 3-stage motor water lift of the 80-3200 with a 2000W in-line heater that raises solution to 200°F. The result is a 200 PSI heated extractor with 205″ water lift and dual-cord operation — appropriate for large commercial facilities where heated extraction improves both sanitization results and stain removal on the 200 PSI pressure range. At 124 lbs, the 80-3200-H is the mid-weight heated extractor in the Sniper line.

80-3200-H Heater, Motor, and Pump Configuration

• 2000W in-line heater delivers solution at 200°F at the spray point
• 200 PSI solution pump for carpet fiber penetration
• Dual 3-stage Ametek motors: 205″ water lift — more extraction depth than 2-stage heated models
• Two 25-ft, 12/3-gauge safety power cords; 115V, NEMA 5-15P
• 12-gallon solution and 12-gallon recovery tanks — roto-molded polyethylene
• Cooling air intake system for motor longevity during extended heated runs
• Waist-height recessed controls; 10″ non-marking wheels; 27″ L × 20″ W × 38″ H

80-3200-H Applications and Environments

The 80-3200-H fits commercial cleaning operations in healthcare facilities, hospitality properties, schools, and corporate offices that require both the extraction depth of 3-stage motors and the sanitization benefit of 200°F solution delivery. Healthcare settings requiring HCAHPS or Joint Commission standards for environmental services use the heated extraction to reduce pathogen load in carpet fiber between scheduled deep cleaning cycles. Hotels with high guest room turnover use the 200°F heat to address odor-causing bacteria more effectively than cold extraction allows. The dual-cord setup (two 25-ft cords to separate circuits) is the standard electrical configuration for commercial buildings.

PSI, Water Lift, and What’s Included

Ships with 200 PSI pump, 2000W in-line heater, dual 3-stage Ametek motors (205″ water lift), 12-gallon tanks, and two 25-ft cords. Made in America. 115V operation.