Sandia Sniper 80-3500-H Extractor – 500 PSI, 2000W Heater, Dual 3-Stage

Sandia Sniper 80-3500-H: 500 PSI Pump, 2000W In-Line Heater, Dual 3-Stage Motors

The Sandia Sniper 80-3500-H is the fully-equipped Sniper: 500 PSI injection pressure, 2000W in-line heater delivering solution at 200°F, and dual 3-stage motors at 205″ water lift. The combination of high-pressure injection and hot water delivery addresses the two primary limitations of portable extraction — insufficient penetration pressure and insufficient soil emulsification heat — without requiring a truck mount. At 141 lbs, it is the heaviest standard Sniper model.

80-3500-H Pump, Heater, and Motor Specs

• 500 PSI adjustable pump — maximum injection pressure in the Sniper line
• 2000W in-line heater: raises solution to 200°F at delivery, not just at the tank
• Dual 3-stage Ametek motors: 205″ water lift for maximum portable extraction depth
• Two 25-ft, 12/3-gauge safety power cords — dual-circuit design handles combined motor and heater load
• 12-gallon solution and 12-gallon recovery tanks — roto-molded polyethylene
• Cooling intake system draws outside air over motors to prevent thermal overload
• Waist-height recessed controls; 10″ non-marking wheels

80-3500-H Applications and Environments

The 80-3500-H is for crews who need the closest portable equivalent to truck mount extraction performance. The 500 PSI + 200°F combination is most effective on severely soiled commercial carpet in high-dwell environments: casinos, event venues, stadium concourses, and food service areas where grease and heavy foot traffic embed soils beyond the reach of 100 PSI or 200 PSI extraction. Healthcare facilities and hospitality properties use the heated extraction to improve sanitization alongside mechanical soil removal. The 141-lb weight requires two operators for stair transport; on flat commercial floors with elevator access, a single operator can manage the unit using the 10″ wheels.

PSI, Water Lift, and What’s Included

Ships with 500 PSI pump, 2000W in-line heater, dual 3-stage Ametek motors (205″ water lift), 12-gallon tanks, and two 25-ft cords. Optional: 25-ft crush-resistant hoses, stainless steel wand with dual spray jets, 4″ upholstery tool.