Novatek RPT w/ Flaps 2″ Air – RPT2AF

RPT2AF 2″ Air RotoPeen with 3M Flaps for Coating Removal and Recoat Profiling

The Novatek RPT2AF is a 2″ pneumatic hand-held scarifier fitted with tungsten-carbide-coated 3M RotoPeen flaps and an integrated vacuum shroud. The flap hub abrades paint, rust, and thin coatings to a bare-metal finish that imitates a shot-blast profile, while the 1.5″ vacuum port captures dust at the source. At 7.5 lbs the 2″ head is the lightest air RotoPeen in the line, suited to vertical and overhead surface prep.

How the RPT2AF Flap Hub Works

The 1.2 HP air motor spins the flap hub at 2,700 RPM so the 3M flaps peen the surface, stripping coatings without gouging the substrate. This produces a uniform recoat profile on steel and concrete. When you hit hard scale or thick buildup the quick-change hub converts to a star-cutter hub in minutes for more aggressive removal.

• 3M RotoPeen flaps strip paint and rust to a bare-metal, shot-blast-style profile
• 2″ working width at 7.5 lbs for controlled vertical, column, and overhead work
• Runs on shop air at 30 CFM @ 90 PSI with no power at the work face
• Integrated shroud with 1.5″ vacuum port for dust capture with a HEPA vacuum
• Quick-change hub converts to star cutters in minutes for heavy removal
• Roller bed follows curved tanks, pipe, and transitions
• Works to within 1.5″ of walls

RPT2AF Applications and Environments

Use the RPT2AF to remove coatings and lay down a uniform recoat profile on bridge and deck steel, structural members, and concrete. It strips floor markings and line stripes, lifts non-slip coatings, and feathers patches and welds. The shroud suits dust-controlled sites, SSPC-NACE surface-prep work, and contained lead-paint removal.

Specifications

Documents

Manual