RPT2EK 2″ Electric RotoPeen Kit with Both Hubs for Removal and Profiling
The Novatek RPT2EK is the kit configuration of the 2″ electric hand-held scarifier. It pairs the 1,200-watt 110V tool with both cutting hubs so one purchase covers aggressive removal and recoat profiling without a compressor. The star-cutter hub fractures hard scale and thick coatings; the 3M flap hub abrades paint and rust to a shot-blast-style finish. The 1.5″ vacuum shroud captures dust on either setup.
What the RPT2EK Kit Adds
Where the single-media electric models ship with one hub, the RPT2EK bundles the hubs and abrasives to convert the 2″ tool between star cutters and 3M flaps in minutes. The 1,200-watt 110V motor drives both modes on standard site power, so one tool handles heavy removal and profiling where air is not available.
- Includes both the star-cutter hub and the 3M RotoPeen flap hub
- Star cutters fracture hard scale; flaps profile to bare metal for recoat
- 1,200-watt 110V motor runs on site power, no compressor required
- Converts between hubs in minutes for removal and profiling in one plan
- 2″ working width for controlled vertical and overhead prep
- Integrated 1.5″ vacuum port for dust capture with a HEPA vacuum
RPT2EK Applications and Environments
Use the RPT2EK on contracts needing both heavy coating removal and a recoat profile where compressed air is not practical, including bridge and deck steel, structural members, and concrete floors. It strips line stripes and floor markings, lifts non-slip coatings, and supports contained lead-paint removal on dust-controlled, SSPC-NACE surface-prep sites.
Specifications
| Cutting media | Star-cutter hub and 3M RotoPeen flap hub |
| Working width | 2 in |
| Motor power | 1,200 W |
| Voltage | 110V |
| Vacuum port | 1.5 in |
| Hub | Quick-change, both hubs included |
Documents
Manual
