Novatek 2 Ft LRS w/ Needle Attachment – 28XN2ST

Novatek 28XN2ST 2 Ft Long Reach with Needle Attachment — Standing Rust and Scale Removal

The 28XN2ST is a 2-foot air-powered needle scaler on a steel barrel. Instead of a single chisel, it drives a bundle of 28 chisel-tip needles that conform to irregular surfaces — weld seams, pitted steel, corners, and contoured castings — to strip rust and scale while the operator stays upright. The 2-foot reach handles floors, low walls, and tank interiors without crouching.

Why Crews Run the 28XN2ST

Needles beat a flat chisel on uneven and contoured surfaces because each needle finds its own depth. The 28 × 3mm chisel-tip needle set covers rust, scale, and coating across broad areas, and the sliding front tube takes up needle wear as the set shortens with use.

• Strip rust, scale, and coatings off floors and low walls standing up
• 28 chisel-tip needles conform to welds, pits, corners, and contoured surfaces a flat chisel skips
• Drives needles at 2,200 blows per minute
• Sliding front tube adjusts for needle wear to hold the working face as needles shorten
• 2-foot steel barrel suits closer work and tank interiors
• Runs on 5 SCFM from a portable compressor

28XN2ST Applications and Environments

Marine deck and weld-seam descaling, warehouse and factory floor rust and coating removal, low overhead structural steel maintenance, and tank cleaning. The needle head suits irregular and pitted surfaces where a chisel cannot make full contact.

Specifications

Documents

Manual