Namco Scooter Beast 1021 Carpet Extractor – 400 PSI, 300″ Lift, 16-Gal Waste, 100-ft Hose

Namco Scooter Beast 1021 Carpet Extractor – 400 PSI, 300″ Water Lift, 100-Foot Hoses

The Namco Scooter Beast 1021 produces 400 PSI at the pump and 300 inches of combined water lift from four two-stage motors. The 100-foot hose and wand set reaches carpet areas throughout large commercial spaces from a single machine position, and the 16-gallon waste tank handles extended extraction runs before requiring emptying. The 25-foot power cord connects to a standard outlet for machine power while the hose reaches the cleaning area.

Scooter Beast 1021 PSI, Water Lift, and Motor Configuration

• PSI: 400 at pump — high-pressure solution injection for deep commercial carpet extraction.
• Water lift: 300 inches combined from 4 two-stage motors — four individual two-stage vacuum motors operating in combination produce 300″ of static lift, pulling moisture from heavily saturated carpet and padding.
• Hose: 100 ft — reaches carpet in large hotel ballrooms, conference centers, and large commercial suites from a single machine position in the corridor or lobby.
• Waste tank: 16 gallons — extended extraction capacity before the machine requires emptying during large-area cleaning runs.
• Power cord: 25 ft — machine connects to a standard outlet; the 100-foot hose provides the reach to the cleaning area.
• 4 two-stage motors — each motor provides two stages of suction amplification; four in combination produce the 300″ lift figure.

Large-Area Commercial Carpet Extraction with the Scooter Beast

The 100-foot hose reach eliminates the need to reposition the machine between cleaning areas on large floor plans. A single operator positions the Scooter Beast at one end of a hotel ballroom or conference room corridor and cleans the full space with the wand before needing to move the machine. The 16-gallon waste tank handles the recovered moisture from extensive extraction runs—at standard extraction rates, 16 gallons supports approximately 1,600–2,400 square feet of carpet extraction before the tank requires emptying. The 400 PSI and 300″ combined lift handle the heavy soil loads typical of high-traffic commercial carpet that has not been recently extracted.

Four Two-Stage Motors and Combined Water Lift

Two-stage vacuum motors use two impellers in series: the first impeller amplifies airflow from the inlet, and the second amplifies it further before exhaust. Combining four two-stage motors in a single machine multiplies the total available lift force. At 300″ combined static lift, the Scooter Beast can pull moisture from deeply saturated carpet backing and padding—the primary challenge in flood extraction and heavily soiled commercial carpet cleaning where single-motor extractors (typically 100–150″ lift) cannot fully recover moisture from the carpet structure.

Scooter Beast in Action