HSE-2003-0MG10 Hot Water Pressure Washer for Grease, Oil, and Heavy-Soil Wash Routes
The HSE Series is designed with a powder coated steel frame, making it extremely durable. It is ideal for cleaning on construction sites, farms, mining and oil fields. Facility managers and contractors specify the HSE-2003-0MG10 when uptime and serviceability matter more than entry-price tags.
HSE-2003-0MG10 Pump, Frame, and Out-of-Box Kit
The HSE-2003-0MG10 ships with the pump, chassis, and wand-line components specified for commercial use rather than weekend duty.
- Pump build — Factory preset unloader · Forged brass manifold · Thermal relief valve · High pressure detergent injector. Translates into longer service intervals between rebuild and consistent flow under daily duty cycles.
- Motor — Totally enclosed fan-cooled electric motor with manual thermal overload protection · 35-foot power cord
- Chassis — Reinforced powder coated steel frame with center balanced lift · 13-inch flat-free tires. Reduces operator fatigue on long jobs and survives bouncing in service trucks.
- Components — Energy-efficient top-fired heat exchanger · No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
- Miscellaneous — Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 225°F
- Out-of-box kit — Quick connect nozzles – 0°, 15°, 25° and 40° · 50-foot x 3/8-inch steel wire-braided hose · Adjustable pressure insulated dual lance with trigger gun. Crew is operational without a separate accessories order.
- Warranty — 1 Year Electric Motor · 3 Year Coil · 7 Year General Pump. Factory-backed coverage on the wear components facility crews replace first.
HSE-2003-0MG10 Applications and Environments
The HSE-2003-0MG10 fits commercial cleaning routes where grease, oil, and protein soils survive cold-water rinse: restaurant exhaust hood and grease-pit service, fleet washing of trucks and heavy equipment, food-processing sanitation, oil-field equipment maintenance, animal housing washdown, and graffiti removal under municipal contracts. Hot-water output cuts dwell time and chemical demand versus cold-water units in the same PSI/GPM band. Restoration contractors stack it for high-volume disaster cleanup.
HSE-2003-0MG10 Pump, Engine, and CARB Notes
General feeds the high-pressure circuit; preset unloader keeps the pump from over-heating during trigger-off cycles. The engine is dealer-serviceable through any small-engine shop. The pump shaft seal is the first replaceable wear part on units run in continuous-duty rotations.
Specifications
| PSI | 2000 |
| GPM | 2.8 |
| Horsepower/Motor | 4.0 HP, 230V, 1Ø, 18.0A |
| Pump | General |
| Plug Type | NEMA 6-20P |
| Burner Fuel Tank Capacity | 4.0 gallon |
| Burner Fuel Cons. | 1.48 gph |
| BTU Per Hour | 207,200 |
| Net Weight | 316.00 lbs. |
| Shipping Weight | 439.00 lbs. |
| Length | 43.00 in. |
| Width | 29.50 in. |
| Height | 36.50 in. |
Documents
Product Manual
Product Sheet
