HEPA Air Scrubber with Bi-Polar Ionization for Enhanced Pathogen Control
The KwiKool KBX600 BioAir Max adds a needle-point bi-polar ionizer to the KBP600 platform, creating a three-stage treatment system: HEPA filtration, UVC germicidal irradiation, and active ion generation. The ionizer discharges a balanced stream of positive and negative ions into the treated airstream, which cluster residual fine particles, neutralize odors, and inactivate pathogens that survive the filter and UVC stages. ETL and CETL listed. Made in the USA.
Three-Stage Air Treatment Performance
Stage one: a 4-inch HEPA filter captures 99.97% of particles 0.3 microns and larger — hospital-grade standard filtration. Stage two: dual UVC lamps (30W each, up to 85W max) irradiate the filter face, airstream, and internal surfaces continuously. Stage three: the needle-point bi-polar ionizer generates positive and negative ions that travel with the discharge air into the treated space, addressing particles and pathogens beyond the direct airflow path. The centrifugal direct-drive fan delivers 680, 660, or 620 CFM at zero static pressure across three speeds with four selectable discharge directions. Coverage at CDC 6-ACH standard (9-foot ceilings): 700 sq. ft. An 8-inch stainless top discharge flange (optional 12-inch) and CK-12S-SS ceiling kit are available accessories.
Specifications
The KBX600 draws 5.24A at 0.32 kW on a 115V/15A NEMA 5-15 circuit — slightly above the KBP600 due to the ionizer draw. Unit dimensions are 16.5″ × 22.25″ × 38″ and unit weight is 85 lbs. Replacement filters: 14-FILTERBIO (4″ HEPA) and 14-FILTERPRE (pre-filter), shared with the KBP600 and KBP1000. Replacement UVC bulb: KK-UVB1.
| Specification | Value |
|---|---|
| Airflow (zero static) | 680 / 660 / 620 CFM — 3-speed |
| Discharge Directions | 4-way selectable (quad-directional) |
| Coverage (CDC 6-ACH @ 9ft) | 700 sq. ft. |
| HEPA Filtration | 99.97% @ ≥0.3 microns (4″ thick) |
| UVC Lamps | 2 × 30W (Max 85W each) |
| Ionizer | Needle-point bi-polar |
| Top Discharge Flange | 8″ stainless steel (optional 12″) |
| Optional Ceiling Kit | CK-12S-SS (12″ dia. stainless) |
| Replacement HEPA Filter | 14-FILTERBIO |
| Replacement Pre-Filter | 14-FILTERPRE |
| Voltage / Plug | 115V single phase / NEMA 5-15 |
| Running Current | 5.24A |
| Recommended Breaker | 15A |
| Power | 0.32 kW |
| Dimensions (W × D × H) | 16.5″ × 22.25″ × 38″ |
| Unit Weight | 85 lbs / Shipping: 120 lbs |
| Certifications | ETL / CETL (UL and CSA standards) |
| Origin | Made in USA |
Documents
KwiKool KBX600 Specification Sheet (PDF)
