Aerospace America 9160 600EV Compact HEPA Scrubber for Tight, Occupied Spaces
The Aeroclean 600EV is a 32 lb variable-speed scrubber that runs as quiet as 42 dB on low, built for small rooms where a full-size negative-air machine would be loud and oversized. It uses a centrifugal fan rather than a high-RPM blower, so it cleans air without the noise floor that makes large units impractical in occupied buildings. Facility teams reach for it when the job is a single room rather than a whole-floor loss.
9160 Variable Speed and Noise Control
The 0-550 CFM range and low-speed sound level let you match output to the room instead of running flat out.
- 0-550 CFM variable speed — dial airflow to room size rather than living with one fixed rate.
- 66 dB high / 42 dB low at 10 ft — run it in occupied offices and classrooms without drowning out conversation.
- Three-stage 12×12 filtration — pre-filter and ring filter protect the 12x12x6 HEPA final stage.
- 1/2 HP centrifugal fan — moves air at low sound rather than relying on RPM.
- 1.67 amp draw at 110V — light enough to share a circuit with other equipment.
- 0-3″ minihelic gauge — full speed with new filters reads 1.9 inches; change at 2.4 inches.
- Optional carbon ring filter — swap the second stage for odor control when the job calls for it.
9160 Applications and Environments
The 9160 fits single-room mold and water-damage work, hotel and office remediation around guests and staff, schools, and healthcare spaces where sound and footprint both matter. The aircraft-aluminum body weighs 32 lbs and exhausts through an 8-inch side duct, so one tech can carry it up stairs and set up in a closet-sized area. The carbon ring filter option turns it into an odor-control unit for sewage or smoke jobs without buying a separate machine. With new filters the gauge reads 1.9 inches at full speed, and the spec calls for a change at 2.4 inches.
Specifications
| Air capacity | 0-550 CFM variable speed |
| Power | 110V, 1.67 amps |
| Motor | 1/2 HP, quiet centrifugal fan |
| 1st stage | 12x12x1/2 pre-filter (9150-01) |
| 2nd stage | 12x12x1 ring filter (9150-02), carbon optional (9160-02C) |
| 3rd stage | 12x12x6 HEPA (9160-03) |
| Instrumentation | 0-3″ minihelic gauge; change filters at 2.4″ |
| Ducting | 8-inch side exhaust |
| Noise level | 66 dB high / 42 dB low at 10 ft |
| Dimensions | 14″ W x 19″ L x 15″ H |
| Weight | 32 lbs |
Documents
9160 Specification Sheet (PDF)
9160 Owner’s Manual (PDF)









